The Rosco VORTEX 360 Dual Rotator is one of the most versatile accessories ever offered to lighting designers. The sleek unit houses two carefully engineered stainless steel gear drives to assure long term reliable operation. A single silent motor drives both gear assemblies. Even at full speed, the VORTEX 360 Dual Rotator is so quiet it can be used anywhere in a theatre or venue - including front-of-house positions in a theatre or grids on low ceilings in restaurants or stores.

The VORTEX 360 Dual Rotator will fit the iris slot of the ETC Source Four, the Altman Shakespeare, Strand SL and the Selecon Pacific. It will accept standard B size (86 mm) steel or glass gobos.

The VORTEX 360 comes ready to use no additional power supply is needed to get operational.. A 12v transformer is included and can be plugged directly into a wall outlet.

The rotational speed of the VORTEX 360 is adjusted by the simplecontrol knob conveniently positioned on the top of the unit or by plugging the 12v transformer into an electronic dimmer capable of handling inductive loads. When powered through a dimmer, the operator can control the speed of rotation through the lighting control board. Please check with the dimmer manufacture before using the VORTEX in this fashion. Failure to use a compatible dimmer can result in overheating and/or damage to both the VORTEX and the dimmer.

The Vortex 360 includes a three-way toggle switch, which serves as an on/off switch and controls the direction of rotation. The front and rear gears rotate opposite each other - but the switch allows the user to determine whether the front or rear will operate clockwise.

Warning: Always attach a safety cable from the VORTEX to fixture housing.

Order Online